Home
COMPANY PROFILE PRODUCTS & SERVICES INFRASTRUCTURE QUALITY POLICY CONTACT US
Products and Services
Electrical Steel Stampings
Stator Stacks
Interlocked and AutoSkewed Cores
Steel Slitting

Most of the engineering units in north were dependent for Steel Slitting facilities located in far off places and as such we were encouraged by some of these companies to set up the Steel processing facility locally and with their support we entered into this business. In Steel Slitting we have achieved the explicit distinction of Slitting the material with the minimum scrap .5 mm on each side and within the tolerance of +/- .05 mm.

Lamination Punching

We efficiently cater to lamination requirements of our clients with the help of high speed presses of 100 ton, 125 ton, 160 ton, 200 ton and 350 ton with the variable speed of 200-700 SPM for lamination punching that we have installed at our production unit along with autoskewing and auto stacking controller, strip welder & belt conveyor.

Decarb Annealing
We have installed a Semi Continuous Decarb Annealing Furnace installed capacity of 400 M.T. per month for De-Carb Annealing and Bluing of Semi Processed Steel and thus converting the same into Electrical grade material suitable for Electrical Stampings.Under this Process the Stampings pass through different chambers which are electrically heated having positive atmosphere so as to reduce the Carbon% and develop a uniform Grain Structure thereby reducing the Watt losses of the material.
Cold Rolled Semi Processed Lamination Steel is probably the most common material in use today. Ease of stamping and low tool wear help to contribute to the low cost of finished laminations. Carbon steel is considered for applications where relatively high core losses are acceptable (D.C. pole pieces, low duty cycles, etc.) and low first cost of the end unit is of primary importance. This material is always annealed after stamping to develop optimum properties and remove the punching stresses. This adds little to the cost when done in a continuous furnace, with controlled atmosphere and allows an oxide coat to be added to the surface to provide interlaminar resistance. The heat treatment is somewhat critical and when properly annealed, modern grades of Lamination Steel have core losses equivalent to the lower grades of silicon steel.
Die-Casting
From the very beginning Pooja Metal's determination to provide customers with full support has been realized by establishing our own die-casting facility for rotors and alloy components.We have recently setup a green field project at Haridwar, Uttranchal for manufacturing of Aluminium Alloy Components. With built-up area of 15000 sq.ft. and further scope to expand, we have installed five nos. 180/120/150 tons Die-casting machines to start with.The unit has been designed and developed to cater to the growing demand for die-casting of Alloy Components. The Company plans to install CNC Machines along with other required equipments to manufacture finished components in due course of time. In-additon to this the company also has Die Casting facilities with horizontal and vertical Die Casting machines installed at the Faridabad unit.
      2012  POOJA METAL PROCESSORS (P) LTD.    Telephone:+91-129-4264600 (100 lines)  Email:poojametal@airtelmail.in
COMPANY PROFILE PRODUCTS & SERVICES INFRASTRUCTURE QUALITY POLICY CONTACT US SITE MAP RESOURCE